McLaren ARTURA, Руководство пользователя

Страница: 95 / 326

Road markings detected on each side
of the vehicle.
Vehicle departing the lane to the left-
hand side.
Vehicle departing the lane to the right-
hand side.
Lane departure warning is not enabled by
default. The feature can be enabled or disabled
using the button on the dashboard and will retain
the same state when the ignition is switched off
and on again.
An audible warning tone will sound when the
feature is enabled using the button.
The notification light on the Driver Display
will illuminate and warning message will
be displayed if there is a fault with the system.
The notification light and warning message may
be accompanied by an audible warning tone.
The following may have an effect on the
operation of lane departure warning:
• The camera view is obscured by stickers or
due to dirty, misted or frozen windscreen
or poor weather conditions, for example,
fog, heavy rain, heavy spray or snow
• The camera view is dazzled by low sun light
• The road lanes are too narrow or too wide
• The road has very tight bends
•
The road lane markings are not available,
are too wide, are in poor condition or are
covered by water, snow or mud
Other Assistance
Touch High Beam Assist to enable the feature,
which will automatically dip the main beam
headlamps for oncoming traffic. See Auto High
Beam Assist, page 1.35.
Touch Undertake Prevention to enable the
feature, which will prevent the vehicle from
undertaking other vehicles when Adaptive Cruise
Control (ACC) is active. See Adaptive Cruise
Control (ACC), page 2.48.
2.39
Driving Controls
Driving Safety Systems
R