McLaren ARTURA, Руководство пользователя

Страница: 75 / 326

NOTE: If reverse or drive is selected at
speeds above 6 mph (10 km/h), the
transmission will engage neutral, as a
self protection feature.
When travelling at speeds below 6 mph
(10 km/h), neutral can be selected by
pressing the N button.
When reverse is selected and the brakes
are released, the vehicle will begin to
move slowly without any throttle use,
making it useful for parking
manoeuvres.
With reverse selected, drive is provided
by the eMotor only. The engine may
remain on in idle only.
The gear (manual mode) or the gear position
(automatic mode) selected will be shown on the
Driver Display.
WARNING: A warning message will
appear on the Driver Display to inform
you of the fault. Adapt your driving
style while this fault exists, you are
responsible for the vehicle’s speed at
all times. Contact your McLaren
retailer.
NOTE: The gear position will not be
displayed if there is a system
communication fault. A warning
message will appear on the Driver
Display to inform you of the fault. Adapt
your driving style while this fault exists,
you are responsible for the vehicle’s
speed at all times. Contact your McLaren
retailer.
Accelerator pedal position
Your style of driving influences how the seamless
shift gearbox changes gear.
With light accelerator pedal use, upshifts are
made at lower engine speeds. With firmer
accelerator pedal use, upshifts are made at
higher engine speeds.
Kickdown
Kickdown is designed to achieve immediate
acceleration when in automatic mode.
Depress the accelerator pedal fully beyond the
pressure point, a click will be felt through the
pedal. The gearbox will downshift immediately
to the lowest appropriate gear, and maximum
acceleration will follow. Once the pedal pressure
is released, kickdown will cease and normal gear
changes will resume.
NOTE: Moderate accelerator pedal
pressure may also cause the gearbox
to downshift, depending on vehicle
speed.
2.19
Driving Controls
Seamless Shift Gearbox
R