McLaren ARTURA, Руководство пользователя

Страница: 68 / 326

Driving
Driving away
WARNING: Never turn the vehicle off
while driving, there will be no
assistance for the steering or the foot
brake. You will need more effort to
steer and brake and could lose control
of the vehicle and cause an accident.
NOTE: Do not drive at high engine
speeds until the engine has reached
normal operating temperature.
NOTE: The doors will lock when the
vehicle reaches a speed of
approximately 9 mph (15 km/h). Auto
lock can be set on the Central Display,
see Automatic door locking, page 4.15.
NOTE: During extensive parking
manoeuvres the steering assistance
might feel slightly stiffer. This is normal
and designed to protect the steering
system from overheating.
NOTE: When starting from cold, engine
idle speed may be increased and gear
changes may occur at higher engine
speeds. The catalytic converter will
reach its operating temperature quicker
and reduce engine emissions.
1. With the engine running or the eMotor on,
press and hold the brake pedal.
2. Select drive or reverse gear, or initiate an
upshift by operating the gearshift paddles.
For more information, see Gearshift
paddles, page 2.21 and Gear positions, page
2.18.
3. Keep the brake pedal depressed and
release the parking brake switch. The red
status light on the Driver Display will be
extinguished.
WARNING: If the parking brake is
manually released, the vehicle may
start to move.
NOTE: If the parking brake is not
manually released, it will automatically
release as the vehicle is driven off
forward, or in reverse as long as the
following conditions are met:
• All doors are closed
• Driver’s seat belt is buckled
4. Carefully depress the accelerator pedal.
Engine warning light
This engine warning light illuminates when
the ignition is on and extinguishes as soon
as the engine is started, provided no faults exist.
If the light illuminates while driving and the
message "Engine System Malfunction" appears
on the Driver Display, an engine management
fault has been detected and reduced engine
performance may be experienced. Stop the
vehicle as soon as safety permits and contact
your McLaren retailer.
If the engine warning light flashes, it indicates
that an engine misfire exists, which could cause
damage to the catalytic converters. Reduce the
engine speed and load until the warning light
stops flashing and continue the journey at a
moderate speed. Contact your McLaren retailer
as soon as possible.
2.12
Driving Controls
Starting and Driving
L