McLaren ARTURA, Руководство пользователя

Страница: 29 / 326

Steering column adjustment
WARNING: Only adjust the steering
wheel position when the vehicle is
stationary. You may not be able to
observe road and traffic conditions.
This could lead to you losing control
of the vehicle which may result in an
accident.
The steering wheel position may be adjusted for
height and reach using the column control switch
when the vehicle is in any awake mode, see
Vehicle electrical status, page 2.04.
The column control switch is located on the left-
hand side of the steering column.
1. Height: Raise
2. Height: Lower
3. Reach: Away
4. Reach: Towards
Moving the column control switch in directions
1 & 2 adjusts the steering wheel height, raising
or lowering the wheel’s position.
Moving the column control switch in directions
3 & 4 adjusts the steering wheel reach, moving
it closer or further away.
NOTE: The column control switch will
only adjust the steering wheel in one
direction at a time.
Using the column control switch, position the
steering wheel so that:
• your arms are slightly bent when you hold
the wheel.
• you can move your legs freely.
•
you can see all the information on the
Driver Display clearly.
Comfort entry/exit
When enabled, comfort entry/exit allows the
steering wheel and column will move fully
inwards (away from the driver) and to its highest
position when the engine is off and the driver’s
door is opened.
You can return the steering wheel and column
to its most recent position using the control stalk
on the left of the steering column. See Comfort
entry, page 1.18.
WARNING: Ensure that your hands
are kept clear of the wheel and
column as the steering wheel moves.
1.19
Before You Drive
Steering Wheel and Steering Column
R