MA/MAC6700 Rear Panel Connections
1
A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
Part No. 04142300
MA6700 / MAC6700
Connect the MA/MAC6700 power
cord to a live AC outlet. Refer to
information on the back panel of
your MA/MAC6700 to determine
the correct voltage for your unit
POWER CONTROL MAIN
Output sends turn On/Off
signals to a McIntosh Compo-
nent when the MA/MAC6700 is
switched On/Off
DATA PORTS send
signals to Source Com-
ponents to allow control
with the MA/MAC6700
Remote Control
GND terminal
accepts a ground
wire from a
turntable
RECORD OUT
sends signals to
the input of a
recording device
PHONO MM accepts
signals from a Mov-
ing Magnet Phono
Cartridge
SRVR(REC), DVD, CD2,
CD and AUX INPUTS
accept high level program
source signals
PASSTHRU Power
Control Input receives
turn On/Off signals
from an Audio/Video
Control Center
PHONO MC accepts
the low level signals
from a Moving Coil
Phono Cartridge
OUTPUTS 1 and 2 send signals
to Power Amplifiers and are
switched On/Off with the Front
Panel Output 1 and 2 Push-
Buttons or Remote Control
Push-Buttons
DIGITAL AUDIO INPUTS
for components with Digital
Optical (1) and Coaxial (2)
Outputs sending digital
audio signals
BALanced INPUTS
accept high level pro-
gram source signals
USB D/A Digital
Audio Input for
connection to a
computer
RS232-C connector
1
for connection to a
computer or other
control device
IR INput for
signals from a
compatible IR
Room Sensor
POWER CONTROL TRIGger
outputs 1 and 2 send turn On/
Off signals to assignable com-
ponents
Main Fuse holder, refer to
information on the back
panel of your MA/MAC6700
to determine the correct fuse
size and rating
PWR AMP input
accepts signals
from the internal
Preamplifier or a
separate external
Preamplifier
LEFT OUTPUT
connections for a
2, 4 or 8 ohm
loudspeaker
JUMPER PLUGS con-
nect the Preamplifier
OUTPUT 1 Jacks to the
PWR AMP IN Jacks and
are required for normal
operation
RIGHT OUTPUT
connections for a
2, 4 or 8 ohm
loudspeaker
1
Refer to page 5 of the MA/MAC6700 Owner’s
Manual for addition cable information.
Reserved for the instal-
lation of optional Tuner
Module for the MA6700.
A Tuner Module is factory
installed in the MAC6700
