McElroy TracStar 500 Series 3, Руководство оператора

Страница: 13 / 60

Fusion Equipment Safety
1 - 6
Operating Fusion Machine
Place fusion machine on as level ground as possible.
If it is necessary to operate machine on unlevel grade, chock
the tracks and block the unit to make it as stable as possible.
Some unstable conditions may be ice, snow, mud and loose
gravel.
Operating machine on a grade steeper than
30% could cause the machine to tip over.
Never operate the machine on a grade
steeper than 30 % (A 3 foot elevation change
in 10 feet). Always operate fusion machine
from the highest level, on an unlevel grade.
Failure to do so could result in serious injury
or death.
TX01902-3-30-11
CD00
40
2B-12
-3
0-
97
Facer Blades Are Sharp
Facer blades are sharp and can cut. Never
attempt to remove shavings while the facer is
running, or is in the facing position between the
jaws. Use care when operating the facer, and
when handling the unit.
NOTICE: Disconnect power from the facer, and remove the facer
blades before attempting any maintenance or adjustment.
NOTICE: Never extend the blade beyond the inner or outer
circumference of the facer.
TX02378-1-24-05
WR000
73
-4
-6
-9
3
Keep Machine Away From Edge of Ditch
Heavy equipment too close to a ditch can
cause the walls of the ditch to cave-in. Keep the
machine far enough away from the edge of the
ditch to prevent injury to personnel and damage
to the equipment from a cave-in.
TX01447-3-30-11
CD00
40
8-12
-31-9
7