McElroy Hornet XL ASW31401, Руководство оператора

Страница: 17 / 34

Gener
al
Information
3 - 6 General Information Hornet™ XL
Install Heater Adapters
Correctly sized heater adapters must be installed before
performing a fusion with the Hornet™ XL. The adapters are
sized by the main pipe size and the fitting size.
Install Heater Adapters:
1) Position the fitting adapter between the bends of the
heater support bracket. Position the pipe adapter
opposite of the fitting adapter.
2)
Insert the screw into the pipe adapter and tighten the
screw enough to hold the adapters to the heater body.
3)
Rotate the adapters and align the marks on the
adapters with the mark on the heater body.
4) After both adapter are aligned, tighten the screw to
secure the position of the adapters.
Detachable Handle
The handwheel can be removed and positioned on either side
of the carriage.
1) Push the button of the detent pin, grasp the handwheel
and pull away from the carriage.
2)
Align the tab on the back of the handwheel with the slot
on the carriage to attach the handwheel.
CD02440-03-15-19
Pipe Adapter
Fitting Adapter Heater Support Bracket
CD02443-03-15-19
CD02444-03-15-19
Adapter Alignment
Mark
Adapter Alignment
Mark
Heater Alignment
Mark
Heater Alignment
Mark
CD02442-02-21-19
CD02493-03-15-19
CD02441-03-15-19
Fitting Size
Main Pipe Size Alignment Mark
Detent Pin Button Handwheel Tab
Carriage Slot
TX05399-03-15-19