Microwave Oven
7.
Press PROGRAM SAVE to save the program changes.
8.
To discard changes, press STOP/RESET.
Programming Multiple Stages
Up to four different cooking cycles can be programmed into a memory pad.
To use stage cooking:
1.
Follow steps 1 through 5 above.
6. Press
STAGE.
•This will begin programming for the next cooking stage.
•Display indicates stage to be programmed.
•Enter cook time and power level as in steps 4 and 5.
•To enter another cooking stage for that pad, press STAGE pad again.
•Up to four different stages can be programmed.
•Total cooking time (all stages totalled) is 60 minutes.
7. Press
QUANTITY pad.
•CF:80
displays.
•Enter desired cooking factor by using numeric key pads (1 for 10% through
0 for 100%).
8.
Press PROGRAM SAVE to save the program and changes.
9.
To discard changes, press STOP/RESET before pressing PROGRAM SAVE.
What is Stage Cooking
Stage cooking enables several different cooking cycles, or stages, to be used
consecutively without repeated input from the user. Stage cooking can be set to
defrost food initially, then cook it, and then keep the food warm until serving time.
The total cooking time for all combined stages cannot exceed 60 minutes.
©
2002 McDonald’s Corporation
©McDonald’s Australia Limited
Version
1.0:
December 2003
This manual is for the exclusive use of licensees and employees of McDonald’s Systems Inc
Page 11 of 17
