McAfee WebShield e500, Руководство по установке

Страница: 38 / 292

Installation Guide — English
ENG - 28 McAfee WebShield e500 Appliance version 2.5
Installing the appliance
When you have gathered the required configuration
information (see
page 18 ), you are ready to install the
appliance in the required location, making the
necessary connections (step 2).
This chapter describes the installation steps.
We recommend that you read them before
performing the actions, to ensure that you know what
is required.
See page 11 for a list of additional required items.
Step 3 — configuring the appliance’s network
settings — is described on
page 32 .
For details on the appliance’s ports and connectors,
see
page 14 .
To install the WebShield e500 Appliance:
1. Read the safety warnings in “Power and safety
information” on page 3 and ensure that you
follow them at all times.
2. Remove the WebShield e500 Appliance from
any protective packaging and place it on a flat
surface.
3. If you are going to install the appliance in a
specific place, such as a 19” (inch) rack, perform
the following steps ensuring that you follow all
safety warnings; see
“Power and safety
information” on page 3 :
a. Prepare the intended location.
You can use the mounting kit to install the WebShield e500
Appliance into a 19” (inch) rack. Follow the instructions on
page viii
(at the front of this guide).
Ensure that you allow for adequate ventilation and access to the
appliance’s ports and connectors when you put it in place.
b. Put the appliance in its intended location.
Ensure that the appliance is secured firmly in place, so that it cannot
fall.
5
Configure the
appliance’s
network settings
3
Install the
appliance
2
1
Configure the
appliance’s
protocol settings
4
Gather the
information
configuration
Back up the
appliance’s
settings