B. General
B1. Scope of Delivery
The following components are included in your delivery:
mc 611 preamplifier
A/C power cord
MC system remote control
B2. Placement
Make sure to leave a minimum space of 2 cm
(approx. 1”) on all sides of the preamplifier to
allow heat to escape.
Never completely cover the preamplifier during
operation!
B3. Maintenance
Unplug the unit before cleaning!
To clean the exterior surfaces of your MC preamplifier, use a dry, soft cloth. To remove
finger prints and other grease spots use a soft cloth moistened with a mild detergent dis
-
solved in water.
The cloth must never be dripping wet!
If water or other fluids enter the cabinet, you risk
to damage the preamplifier.
Never use scouring pads, steel wool, scouring powders or harsh chemical agents, alcohol,
thinners, benzine, insecticide or other volatile substances, as these will destroy the finish
of the cabinet.
minimum space 2 cm
mc 611 preamplifier
4
