Installation and use
15
MCK 3000
3.3.1 Keyboard
KEY
FUNCTION
During the programming phase the operator can increase the value of
the data by one figure at a time (by pressing and holding the key, the
values displayed can be altered more quickly).
During the programming phase the operator can decrease the value of
the data by one figure at a time (by pressing and holding the key, the
values displayed can be altered more quickly).
Programming key:
allows you to set the parameter selected at that moment (using the
and
keys) by the indicator arrow:
▪
total work width;
▪
calibration of the feed-rate;
▪
number of sectors in which to split the bar.
Display key:
allows you to view the parameter selected at that moment by the
indicator arrow:
▪
feed-rate;
▪
forecast of the hectares that can be worked in an hour (only if speed
is present);
▪
distance covered (in metres).
Display key:
allows you to view the parameter selected at that moment by the
indicator arrow:
▪
total worked area;
▪
partial worked area.
Key to split the working width and select the MANUAL mode.
ON/OFF key.
The key can be used to switch the instrument on and off.
