Alterations reserved
Operating Manual
SAP 46 L ENG
Stand 01/2004
Page 20
5.5.2
Sheet running
If the photocell 1 detects a sheet the
line-up tapes 2 and the lower tapes 3
automatically start to run. The collecting
or height of drop after the pressing
rollers can be altered.
For this purpose swivel the
lower tapes 3 over the stop bolt 4.
The shingle can be set by swivelling the
frame 5 over the collector tape roller 6.
The height of this collecting tape roller
may be altered by loosening the
screws 7.
Bulky products may be pushed down at
the rear edge of the sheet by the
smoother bar 8 ensuring a trouble-free
running of the subsequent sheets.
