Page 13
Alterations reserved
Operating Manual
FA 66 - ME ENG
Stand 12/2002
3.3
Erection
Place the FA 66-ME to the exit of the
folding machine and secure it with
supporting screws 1 against
displacement.
> NOTICE < The centre of sheet should
match with the centre of the delivery!
Set the table 3 into an ergonomically
favourable pick-up height through the
crank 2. Adjust the infeed table 4 to the
necessary height. For this purpose,
insert crank 2 into square 5.
Exit height of folding machine is
infeed height 6 between the upper
and lower infeed tapes.
3.4
Electrical connection
Connect the FA 66-ME with the folding
machine through power plug 1 and
control plug 2. Due to its own drive, the
FA 66-ME may also be connected to
foreign folders. For this purpose, insert
power plug 1 to power supply and
control plug 2 into „ self control „ socket
4 at control panel 3.
Both units must be turned
ON and OFF separately.
> DANGER < Please bear in mind that,
if connected with foreign folders,
there is no joint disconnection
of the FA 66-ME and the foreign
machine. Manufacturer will not be liable
for any damages or injuries caused by
the missing safety disconnection!
