MBG SWEDEN A2043, Руководство по эксплуатации

Страница: 3 / 5

MBG SWEDEN - Soho – Audit – Private (AT01 – 3-6)
Operation Manual – Audit – Private
I
MPORTANT
R
EMARKS
→
For the purpose of security, please change the master code prior to use
→
Please keep codes in a safe place. Do not use personal data like birthdays, telephone numbers...
→
Please keep key in a safe place but not in the safe itself!
→
If the safe will not be used for a long time, please take out batteries
T
O OPEN THE
S
AFE
W
IT H
P
ERSONAL CODE
Enter the correct personal code . The door will open automatically.
Caution: Display will show “ ERROR ” when wrong code inputs. Four wrong code inputs consecutively puts
the safe in secure mode. Display will show “ HOLD15 ” In effect the keypad is inactive for 15 minutes,
eliminating chances of unauthorized operations.
T
O SET
P
ERSONAL C ODE
:
Keep the door opened and unlocked.
1. Press “**” the display shows “ PROG ”, input “ 57 ” and press “ # ” the display will show “ NEW ”
2. Enter your new personal code and then press #, the display will show “ AGAIN ”
3. Enter your new personal code again, the display will show “ DONE ” new personal code changed successfully.
Press #, the door will be locked.
T
O
O
PEN THE
S
AFE
W
IT H
M
ASTER
C
ODE
Enter the
MASTER CODE
(pre-selected 0-0-0-0-0-0). The door will open automatically.
T
O SET
M
ASTER
C
ODE
Keep the door opened and unlocked.
1. Press key “ ** ” the display will show “ PROG ”, enter old master code (pre-selected “0-0-0-0-0-0”) and press
“ # ”, the display will show “ NEW ”.
2. Enter your new master code of 6 digits and press “ # ”, the display will show “ AGAIN ”.
3. Enter your new master code again, the display will show “ DONE ” indicates new master code changed
successfully.
T
O
O
PEN THE
S
AFE
W
IT H
E
MERGENCY
K
EY
Take off the cover of emergency key in the panel, insert the emergency key and turn clockwise 90
0
, display will
show “
n
A
n
UAL ”. Open the door and turn the key anticlockwise 90
0
, press “ # ” key and the bolts will be
automatically retracted. .
T
O
R
EPLACE
B
ATTERIES
If the voltage of batteries is deficient, the display will show “ BA-LO ” and batteries have to be replaced. Please
look at the environmental standards.
I
NSTAL LATIO N
The product must be mounted by securing either the back or the bottom of the safe. You may select the
expansion bolt when it is a concrete wall surface or select clamping bolt when it is a wooden wall surface.