Mazda MX-6, Руководство пользователя

Страница: 195 / 250

J94S.book Page 19 Saturday, June 23, 2001 1:04 PM
M aintenance and Care
Owner Maintenance
S cale B
W hen the engine has not been running,
and the outside tem perature is above 10°C
(50°F), the level should be betw een the
bottom hole on the dipstick and the
bottom of the crosshatched area on the
dipstick.
^C AUTIO N
U se scale B only as a reference.
If outside tem perature is low er than
about 10°C (50°F), start the engine
and insp ect the fluid level after the
engine reaches operating
tem perature.
I f the vehicle has been driven for an
extended period at high speeds or in
city traffic in h ot w eather, inspect
the level only after stopping the
engine and allow ing the fluid to
cool for 30 m inutes.
F ully insert the dipstick. W hen adding
fluid, m ake sure the fluid level d o esn ’t
pass the crosshatched area on the dipstick.
N O TE
Inspect both sides o f the dipstick for
accurate reading.
2 .5 -lite r e n g in e
F lu id h o t sca le A
W hen the vehicle has been driven and the
fluid is at norm al operating tem perature,
about 65°C (150°F), the level m ust be
betw een Full and Low.
F lu id co ld scale B
W hen the engine has not been running
and the outside tem perature is about 20°C
(70°F), the level m ust be betw een F ull and
Low.
/h
CAUTION
U se the cold scale only as a
reference.
I f outside tem perature is low er than
about 20°C (70°F), start the engine
and insp ect the fluid level after the
engine reaches operating
tem perature.
I f the vehicle has been driven for an
extended period at high speeds or in
city traffic in hot w eather, inspect
the level only after stopping the
engine and allow ing the fluid to
cool for 30 m inutes.
8-19
Form No. 8Q50-EA-01G