Mazda mx-5 2017, Руководство пользователя

Страница: 313 / 568

5–91
Interior Features
Bluetooth
®
Voice recognition learning on/off
1. Press the pick-up button or talk button
with a short press.
2.
Say:
[Beep] “Voice training”
3. Prompt: “Enrollment is enabled/
disabled. Would you like to disable/
enable or retrain?”
4.
Say:
[Beep] “Disable” or “Enable”
5. When “Disable” is spoken, the voice
recognition learning is turned off.
When “Enable” is spoken, the voice
recognition learning is turned on.
6. Prompt: “Speaker Enrollment is
disabled/enabled.”
Bluetooth
®
Preparation (Type B)
Device pairing
To use Bluetooth
®
audio and Hands-Free,
the device equipped with Bluetooth
®
has
to be paired to the unit using the following
procedure. A maximum of seven devices
including Bluetooth
®
audio devices and
hands-free mobile phones can be paired.
NOTE

The Bluetooth
®
system may not operate
for 1 or 2 minutes after the ignition
is switched to ACC or ON. However,
this does not indicate a problem. If the
Bluetooth
®
system does not connect
automatically after 1 or 2 minutes have
elapsed, make sure that the Bluetooth
®
setting on the device is normal and
attempt to reconnect the Bluetooth
®
-
enabled device from the vehicle side.

If Bluetooth
®
-enabled devices are used
in the following locations or conditions,
connection via Bluetooth
®
may not be
possible.

The device is in a location hidden
from the center display such as
behind or under a seat, or inside the
glove compartment.

The device contacts or is covered by
a metal object or body.

The device is set to power-saving
mode.
Pairing Procedure
1. Select the icon on the home screen
to display the Settings screen.
2. Select the tab.
3. Select .
4. Turn the Bluetooth
®
setting on.
5. Select to display the
message and switch to the device
operation.
6. Using your device, perform a search
for the Bluetooth
®
device (Peripheral
device).
7. Select “Mazda” from the device list
searched by the device.
MX-5_8FR4-EA-16J_Edition1.indb 91 2016/08/11 20:29:25