z
Transmission in Park or Neutral
(AT)
Are all items normal?
10
Connect the M-MDS to the DLC-2.
Turn ignition switch to the ON position.
(Engine off)
Access TR PID.
Is TR PID indicated P/N when selecting
P or N position
Yes
Go to the next step.
No
Inspect TR switch is adjusted properly,
inspect for open or short circuit
between TR switch and TCM.
Repair or replace components as
required.
Then go to the next step.
11
Is clicking sound heard from starter
relay when the ignition switch is turned
to START?
Yes
Go to step 14.
No
Go to the next step.
12
Inspect the starter relay and following
harnesses.
Between starter relay and PCM
Between starter relay and ignition
switch
(See:
RELAY INSPECTION
)
Are they normal?
Yes
Go to the next step.
No
Repair or replace components as
required.
Then go to step 11.
13
Inspect IGNITION switch and related
harnesses.
(See:
IGNITION SWITCH
INSPECTION
)
Are they normal?
Yes
Go to the next step.
No
Repair or replace components as
required.
Then go to step 11.
14
Inspect the following harnesses.
Between starter relay and Battery
Between starter relay and Starter
Are they normal?
Yes
Go to the next step.
No
Repair or replace as required.
Then go to next step.
15
Inspect the starting system.
(See:
STARTER INSPECTION
[MZI-3.5]
)
Is starting system normal?
Yes
Go to the next step.
No
Repair or replace components as
required.
16
Inspect for seized/hydro locked engine
or flywheel.
Is ENGINE seized or hydro locked?
Yes
Repair or replace components as
required.
No
Go to the next step.
17
Connect the M-MDS to the DLC-2.
Retrieve any continuous memory DTCs.
Are there any continuous memory
DTCs displayed?
Yes
DTC is displayed:
Go to appropriate DTC inspection.
(see
DTC TABLE [MZI-3.5]
.)
Communication error message is
displayed:
Inspect for the following:
2007 Mazda CX-9 Grand Touring
2007 ENGINE PERFORMANCE Symptom Troubleshooting (MZI-3.5) - CX-9
Microsoft
Sunday, November 15, 2009 9:27:36 AM
Page 16
© 2005 Mitchell Repair Information Company, LLC.
