Courtesy of MAZDA MOTORS CORP.
TIMING CHAIN COMPONENT REMOVAL NOTE
1. Turn the crankshaft clockwise so that the crankshaft keyway is in the 11 o'clock position. (This will
position the No.1 cylinder at TDC.)
Fig. 29: View Of Crankshaft Keyway Is 11 O'Clock Position
Courtesy of MAZDA MOTORS CORP.
2. Mark the timing chain at the position of each timing sprocket timing mark.
CAUTION:
z
Do not rotate the crankshaft counterclockwise. The timing chains
may bind, causing engine damage.
NOTE:
z
Verify that there are timing marks in three locations (Yellow 1, Black
2) on the timing chain. If any timing marks are missing, mark the
timing chain.
z
When marking the crankshaft sprocket side timing chain, change the
mark color.
z
When the timing chain is replaced with a new one, mark the new
timing chain at the same positions as the removed timing chain.
2007 Mazda CX-9 Grand Touring
2007 ENGINE Mechanical (MZI-3.5) - CX-9
Microsoft
Sunday, November 15, 2009 9:19:27 AM
Page 24
© 2005 Mitchell Repair Information Company, LLC.
