z
CMP sensor (LH) terminal B and power supply
FRONT HEATED OXYGEN SENSOR (HO2S) REMOVAL/INSTALLATION
[MZI-3.5]
HO2S (LH) REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the engine cover. (see
ENGINE COVER REMOVAL/INSTALLATION [MZI-3.5]
.)
3. Disconnect the HO2S (LH) connector.
4. Remove the HO2S (LH) using the
SST.
5. Install in the reverse order of removal.
Fig. 22: View Of LH HO2S With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
HO2S (RH) REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following part for easier access.
1. Remove the cowl panel. (see
COWL PANEL REMOVAL/INSTALLATION
.)
3. Disconnect the HO2S (RH) connector.
NOTE:
z
If necessary, lubricate the HO2S with Penetrating and Lock Lubricant
loosen to aid in removal.
NOTE:
z
Apply a light coat of anti-seize lubricant to the threads of the HO2S.
NOTE:
z
If necessary, lubricate the HO2S with Penetrating and Lock Lubricant
loosen to aid in removal.
2007 Mazda CX-9 Grand Touring
2007 ENGINE PERFORMANCE Control System (MZI-3.5) - CX-9
Microsoft
Sunday, November 15, 2009 9:25:31 AM
Page 25
© 2005 Mitchell Repair Information Company, LLC.