31
Navigation System
PLANNING A ROUTE USING THE TOUCH-SCREEN
IMPORTANT:
In the interest of safety and to reduce distractions while you
are driving, you should always plan a route before you start driving.
To plan a route on your Navigation system, do the following:
1
Push the NAV button to access the Navigation System.
2
Tap the screen (above) to open the
MAIN MENU
(below).
NOTE:
Factory Navigation System is
available if the vehicle is equipped with
the 5.8” LCD screen. Contact your
Authorized Mazda Dealer for more details.
3
Touch
Navigate to
.
4
Touch
Address
.
Navigation System
TO REMOVE OR INSERT THE MAP Sd CARd:
1
Turn the vehicle ignition OFF.
2
Locate and open the door on the lower left side
of the dash (see page 7), then open the slide door.
• Remove card: Push the card once, then pull it out.
• Insert card: Push the card in (label-side up), then slide door closed (left).
NOTE:
•
Connect to www.mazdausa.com/navigation within 60 days of vehicle delivery
and download the most recent map available for your device for free. Refer to
the www.mazdausa.com/navigation section of the Navigation System Owners
Manual for additional information.
•
Only use your MAP SD card for operating and updating your navigation system.
Do not insert the MAP SD card into another vehicle or into any other device
such as a camera.
Sd Card
1389818_14b_Mazda6_SSG_011113.indd 31
1/11/13 4:47 PM
