Mazda 3 Sedan 2020, Руководство пользователя

Страница: 365 / 628

Rear Side Radar Sensor
*
▼
Rear Side Radar Sensor
Your vehicle is equipped with rear side
radar sensor. The following systems
also use the rear side radar sensor.

Blind Spot Monitoring (BSM)

Rear Cross Tra ffi c Alert (RCTA)

Smart Brake Support [Rear Crossing]
(SBS - RC)
The rear side radar sensors emit radio
waves and detect the radio waves
re fl ected o ff a vehicle approaching
from the rear or an obstruction.
4–Door
1. Rear side radar sensor
5–Door
1. Rear side radar sensor
The rear side radar sensors are installed
inside the rear bumper, one on each
side.
Always keep the surface of the rear
bumper near the rear side radar
sensors clean so that they operate
normally. Also, do not apply items such
as stickers.
Refer to Exterior Care on page 6-48.
CAUTION
If the rear bumper receives a severe
impact, the system may no longer
operate normally. Stop the system
immediately and have the vehicle
inspected at an Authorized Mazda
Dealer.
NOTE

The detection ability of the rear side
radar sensor has limitations. In the
following cases, the detection ability
may lower and the system may not
operate normally.

The rear bumper near the rear side
radar sensor has become
deformed.

Snow, ice or mud adheres to the
rear side radar sensor on the rear
bumper.

Under bad weather conditions
such as rain, snow and fog.

Under the following conditions, the
rear side radar sensor cannot detect
target objects or it may be di ffi cult to
detect them.

Small motorcycles, bicycles,
pedestrians, animals, shopping
carts, and stationary objects on a
road or a road side.

Vehicle shapes which do not
re fl ect radar waves well such as
empty trailers with a low vehicle
height and sports cars.
When Driving
i-ACTIVSENSE
*Some models.
4-211
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35