Mazda 3 Sedan 2020, Руководство пользователя

Страница: 285 / 628

Do not get out of the vehicle while
the stop hold control is operating:
Getting out of the vehicle while the
stop hold control is operating is
dangerous as the vehicle may move
unexpectedly and result in an accident.
Before getting out of the vehicle,
switch the MRCC with Stop & Go
function system o ff , shift the selector
lever to the P position, and apply the
parking brake.
CAUTION

If your vehicle is towed or you are
towing something, switch the MRCC
with Stop & Go function system o ff
to prevent an unexpected operation.

Turn the system o ff when the vehicle
is running on a chassis roller.
NOTE

The MRCC with Stop & Go function
system does not detect the following
as physical objects.

Vehicles approaching in the
opposite direction

Pedestrians

Stationary objects (stopped
vehicles, obstructions)

If a vehicle ahead is traveling at an
extremely low speed, the system may
not detect it correctly.

If there is a structure on the road or
an object (such as a monorail) at a
low height o ff the ground in front of
the vehicle, the system may operate.
Therefore, do not use the MRCC
with Stop & Go function.

Do not use the MRCC with Stop &
Go function system under conditions
in which close proximity warnings
are frequently activated.

During headway control travel, the
system accelerates and decelerates
your vehicle in conjunction with the
speed of the vehicle ahead.
However, if it is necessary to
accelerate for a lane change or if the
vehicle ahead brakes suddenly
causing you to close in on the vehicle
rapidly, accelerate using the
accelerator pedal or decelerate using
the brake pedal depending on the
conditions.

While the MRCC with Stop & Go
function system is in use, it does not
cancel even if the selector lever is
operated and any intended engine
braking does not occur. If
deceleration is required, lower the
set speed or depress the brake
pedal.

While braking by the MRCC with
Stop & Go function control is
operating, you might hear an
operation sound, however, this does
not indicate a problem.

The brake lights turn on while
braking by the MRCC with Stop &
Go function control is operating,
however, they may not turn on while
the vehicle is on a down slope at the
set vehicle speed or traveling at a
constant speed and following a
vehicle ahead.

Stop the headway control function to
switch the system to the cruise
control function.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
When Driving
i-ACTIVSENSE
4-131
Mazda3_8JM2-EA - 20H_Edition3_new 2020-12-3 18:39:35