Mazda 3 2018, Руководство пользователя

Страница: 41 / 624

Child-Restraint System Suitability for Various Seat
Positions Table
(Mexico)
Provided information in the table shows your child-restraint system suitability for various
seating position. For installation suitability of other manufacturer child-restraint system,
carefully consult the manufacturer's instructions which accompany the child-restraint
system.
When installing a child-restraint system, the following points must be observed:

If the child-restraint system does not fit into the seatback because of the head restraint,
adjust the head restraint or remove the head restraint so that the child-restraint system fits
into the seatback. However, when installing a backless booster seat, always install the
vehicle head restraint to the seat where the backless booster seat is installed.
Refer to Head Restraints on page 2-10.

When installing a child-restraint system to the rear seat, adjust the front seat position so
that the front seat does not contact the child-restraint system.
Refer to Seat Operation on page 2-5.

When installing a child-restraint system came equipped with a tether, remove the head
restraint.
Refer to Head Restraints on page 2-10.
LATCH lower anchor-secured child-restraint systems
When installing a child-restraint system to the rear seat, refer to the child-restraint system
manufacturer's instructions and the Using LATCH Lower Anchor on page 2-40.
Mass group
Size
Class
Fixture
Seat Positions
Vehicle LATCH po-
sitions
Rear seat (center)
Front passenger
seat (outboard)
Rear seat (out-
board)
Carrycot
F ISO/L1 X X X
G ISO/L2 X X X
(1) X X X
GROUP 0 Up to 10
kg (up to 22 lb)
E ISO/R1 IL X X
(1) X X X
GROUP 0 Up to
13 kg (up to 29 lb)
E ISO/R1 IL X X
D ISO/R2 IL X X
C ISO/R3 IL X X
(1) X X X
Essential Safety Equipment
Child-Restraint
2-27
Mazda3_8GE4-EA-17F_Edition1 2017-4-7 11:59:21