DTC C006B:00/C0072:68 [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0402b2884600.html[1/7/13 9:29:45 AM]
2013 - CX-5 - Brakes
DTC C006B:00/C0072:68 [DYNAMIC STABILITY CONTROL (DSC)]
DTC C006B:00,
C0072:68
TCS/DSC control system
DETECTION
CONDITION
C006B:00
DSC control continues for a specified period of time or more
C0072:68
Due to excessive braking, TCS control using braking is
temporarily inhibited.
FAIL-SAFE
FUNCTION
C006B:00
Illuminates the TCS/DSC indicator light.
Tire pressure monitoring system warning light illuminates
after flashes.
Inhibits the TCS, DSC, roll over mitigation (ROM), and TPMS
controls.
C0072:68
Illuminates the TCS/DSC indicator light. (Turns on if the slip
of a specific wheel is 10km/h {6.2 mph} or more.)
Inhibits the TCS (brake control) control.
POSSIBLE
CAUSE
This does not indicate a malfunction since constant TCS or DSC control over
an extended period of time is inhibited to protect the DSC solenoid valve
inside the DSC HU or the engine.
SYSTEM
WIRING
DIAGRAM
—
Diagnostic procedure
STEP
INSPECTION
ACTION
1
VERIFY THAT THE SAME DTC IS NOT PRESENT
YesReplace the DSC HU/CM, then go to the
