DTC C0030:07/C0031:07/C0031:29/C0031:2F/C0031:64/C0033:07/C0034:07/C0034:29/C0034:2F/C0034:64/C0036:07/C0037:07/C0037:29/C0037:2F/C0037:64/C0039:07/C003A:07/C003A:29/C003A:2F/C003A:64 [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0402b2906100.html[1/7/13 9:29:01 AM]
2013 - CX-5 - Brakes
DTC
C0030:07/C0031:07/C0031:29/C0031:2F/C0031:64/C0033:07/C0034:07/C0034:29/C0034:2F/C0034:64/C0036:07/C0037:07/C0037:29/C0037:2F/C0037:64/C0039:07/C003A:07/C003A:29/C003A:2F/C003A:64
[DYNAMIC STABILITY CONTROL (DSC)]
NOTE:
When only the driving wheels are rotated while the vehicle is jacked up, DTCs C0037:29 and C003A:29 are input to the memory.
DTC
C0030:07
LF ABS sensor rotor
C0031:07, C0031:29, C0031:2F,
C0031:64
LF ABS wheel-speed sensor/ABS sensor rotor
C0033:07
RF ABS sensor rotor
C0034:07, C0034:29, C0034:2F,
C0034:64
RF ABS wheel-speed sensor/ABS sensor rotor
C0036:07
LR ABS sensor rotor
C0037:07, C0037:29, C0037:2F,
C0037:64
LR ABS wheel-speed sensor/ABS sensor rotor
C0039:07
RR ABS sensor rotor
C003A:07, C003A:29, C003A:2F,
C003A:64
RR ABS wheel-speed sensor/ABS sensor rotor
DETECTION
CONDITION
C0030:07, C0033:07, C0036:07, C0039:07
Periodic abnormality is detected in the signal wave pattern from the ABS wheel-speed sensors.
C0031:07, C0034:07, C0037:07, C003A:07
While the vehicle is traveling at a speed of
10 km/h {6.2 mph} or more
, no signal in any of the four wheels or an extremely low vehicle speed signal is detected.
C0031:29, C0034:29, C0037:29, C003A:29
The wheel-speed signal is not input or an extremely low wheel-speed signal is detected from any of the four wheels when driving at a vehicle speed of
10 km/h {6.2 mph} or
more
C0031:2F, C0034:2F, C0037:2F, C003A:2F
The wheel speed or acceleration speed in any of the 4 wheels is not within the specification.
ABS control continues to operate for
28 s or more
.
C0031:64, C0034:64, C0037:64, C003A:64
While the vehicle is traveling at a speed of
20 km/h {12 mph} or more
, an extremely high vehicle speed signal in any of the four wheels is detected.
FAIL-SAFE
FUNCTION
Illuminates the ABS warning light and TCS/DSC indicator light.
Tire pressure monitoring system warning light illuminates after flashes.
Inhibits the ABS, TCS, DSC, roll over mitigation (ROM), brake assist control, hill launch assist (HLA), and TPMS controls.
(Additionally, when any malfunction is detected in two wheels or more, EBD control is inhibited and the brake system warning light is illuminated.)
POSSIBLE CAUSE
ABS sensor rotor malfunction (missing ABS sensor rotor teeth due to foreign material obstruction)
ABS wheel-speed sensor or ABS sensor rotor installation malfunction (If the ABS sensor rotor is installed at an angle, it may cause output of abnormal wave pattern at high speeds.)
Excessive clearance between the ABS wheel-speed sensor and sensor rotor
ABS wheel-speed sensor malfunction
