Mazda 2007 Zoom-Zoom Скачать руководство пользователя страница 335

Страница: 335 / 410

Black plate (335,1)

4. Disconnect the electrical connector

from the bulb by pressing the tab on
the connector with your finger and
pulling the connector downward.

5. Turn the socket and bulb assembly

counterclockwise and remove it.
Carefully remove the bulb from its
socket in the reflector by gently pulling
it straight backward out of the socket.

6. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an Authorized
Mazda Dealer.

If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.

Use the protective cover and carton for the
replacement bulb to dispose of the old bulb
promptly and out of the reach of children.

Brake lights/Taillights, Rear turn signal
lights, Reverse lights, Rear side-marker
lights

1. Remove the cover.

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

Rear side-maker light
Brake light/Taillight
Rear direction indication light
Reverse light

4. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an Authorized
Mazda Dealer.

High-mount brake light

Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

Maintenance and Care

Owner Maintenance

8-43

CX-7_8X59-EA-07E_Edition3 Page335
Wednesday, July 25 2007 3:20 PM

Form No.8X59-EA-07E

Содержание 2007 Zoom-Zoom



























































































































































































































































































































































































































Результаты поиска

Содержание 2007 Zoom-Zoom

Отзывы:

Похожие инструкции для 2007 Zoom-Zoom

Бренды по названию

Популярные бренды

Mazda 2007 Zoom-Zoom, Руководство пользователя

Результаты поиска

Содержание 2007 Zoom-Zoom

Отзывы:

Похожие инструкции для 2007 Zoom-Zoom

Бренды по названию

Популярные бренды