H O M E L I N K
®
Always check the Owner’s Manual for more operating information and safety features
HomeLink
®
Interior
Lights
Turn ignition on; verify device
operation by pressing HomeLink
®
button (
1
) that was just programmed;
repeat procedure for other buttons
Rolling code synchronization
procedure
Refer to your garage door opener or
device instruction manual to confirm
your system is equipped with a
rolling code feature
Tip: This procedure is easier
done with the assistance of
another person
To synchronize: Press programming
button on garage door opener motor;
press and release the programmed
HomeLink
®
button 2 times within 30
seconds of pressing the garage door
opening motor programming button
Some devices may require you to
press and release a third time to
complete programming procedure
HomeLink
®
Wireless
Control System*
Located on rear view mirror
To program or reprogram:
Ignition must be off; hold
transmitter for the device to
be programmed between 1-3
inches to HomeLink
®
; press
transmitter button and desired
HomeLink
®
button (
1
) simultaneously
until HomeLink
®
indicator light
goes from slow to rapid flashing
Auto-dimming rear
view mirror
Auto-dimming function changes
are based on outside lighting
conditions and if bright headlights
are visible in rear view mirror
Press on (
2
), off (
3
)
*Denotes optional equipment
1. Map/reading light
Press on/off
2. Interior light switch
DOOR = light on when door open
ON = light always on
OFF = light always off
3. Front interior light
4. Rear interior light
5. Sunglass holder
Press concaved lip then open
6. Moonroof tilt switch*
Press rear of switch to tilt rear
of moonroof
Press front of switch to close
7. Moonroof slide switch*
Press rear of switch to open
moonroof
Press front of switch to close
Illuminated visor mirrors
Mirrors lighted when covers open;
off when closed
1
2 3
OFF
DOOR
TILT
SLIDE
1
2
1
5
3
3
6
7
ON
OFF
DOO
R
2
4
