Turning off speed control
There are three ways to turn off the speed control:
•
Depress the brake pedal or the clutch pedal (if equipped). This will
not erase your vehicle’s previously set speed.
•
Press the speed control OFF
control.
•
Turn OFF the ignition.
Note:
When you turn off the speed
control or the ignition, your speed
control set speed memory is erased.
Note:
Fully depressing the clutch
pedal may cause a flare in engine RPM as the throttle is returned to idle.
This is normal.
OVERDRIVE CONTROL (IF EQUIPPED)
Activating overdrive
(Overdrive) is the normal drive position for the best fuel economy.
The overdrive function allows automatic upshifts and downshifts through
all available gears.
Deactivating overdrive
Press the Transmission Control
Switch (TCS) located on the end of
the gearshift lever. The O/D Off
indicator light will illuminate on the
instrument cluster. The transmission
will operate in all gears except overdrive.
To return to normal overdrive mode, press the Transmission Control
Switch again. The O/D Off indicator light will no longer be illuminated.
When you shut off and re-start your vehicle, the transmission will
automatically return to normal
(Overdrive) mode.
For additional information about the gearshift lever and the transmission
control switch operation refer to the
Automatic Transmission
Operation
section of the
Driving
chapter.
O/D
ON/OFF
2006 B-Series (mbs)
Owners Guide (post-2002-fmt)
Canadian_French (fr_can)
Driver Controls
53