S W I T C H E S
Always check the Owner’s Manual for more operating information and safety features
Switches
Switches
Quick Tips
Mazda
Mazda B-Series Truck
page 6
page 7
*Denotes optional equipment
4
8
5
7
6
Dual power mirrors*
To adjust left/right mirror:
Press control switch (
1
)
left/right, tilt knob (
2
) in
direction of desired mirror
movement
Tip: To lock mirrors in place,
move control switch (1) to
center position
3
4
AUT
O
5
U
N
L
O
C
K
L
O
C
K
1
2
Power window switches*
Operate only with ignition
in ACC or ON position
Both windows may be controlled
from driver’s door; passenger door
has separate switch
Driver’s window (
3
): One
touch-down; press and release,
window goes all the way down;
tap front of switch to stop
Press and hold top of switch
to close
Passenger window switch (
4
):
Press bottom/top of switch to
open/close
Power door locks*
Front door lock switches
To lock/unlock both doors: Press
bottom/top on either door switch (
5
)
To lock doors without key, exit
the vehicle, press lock on either
door, close the door
Keyless remote
entry system*
Functions only
with ignition in
OFF position
To lock doors:
Press
button (
1
); pressing
again within 5 seconds causes
doors to relock, horn to beep
once if all doors are closed,
twice if any door is ajar
To unlock doors: Press
(
2
) to
open driver’s door; press again
within 5 seconds to open
other door
Panic alarm: Press
(
3
); horn
sounds, parking lights flash and
interior lights illuminate; press
(
3
) again to stop or insert key
and turn ignition to ON or ACC
position
1
2
3
To unlock: Use key to unlock
either front door, open door
and press top of switch to
unlock other door
Manual door locks will override
power locks
Power Door Unlock Disable
feature,
see Owner’s Manual
Fuel pump
shutoff
Located in right front
trim panel under
instrument panel
Disables fuel pump
after a substantial jolt or collision
To reset: Press down top of
exposed red reset button (
6
)
WARNING: Do not reset
shutoff switch if you see
or smell fuel
Cruise control*
Operates above 30 mph
Press and release ON (
4
)
To set speed: Press and release
SET+ (
6
) at desired speed; hold
(
6
) to accelerate
To decelerate: Press and hold
CST– (
7
), release at desired
speed; or tap brake pedal, press
and release (
6
) at desired speed
Incremental deceleration: Press
and release (
7
), each tap =
minus 1 mph
Incremental acceleration: Press
and release (
6
), each tap =
plus 1 mph
To cancel: Tap brake/clutch
pedal or push OFF button (
8
)
Return to preset speed
(after braking): Press and
release RES (resume) button (
5
)
Interior lights
9. Interior light
10. Interior light switch
ON = light always on
DOOR = light on when
door open
OFF = light always off
Tip: Battery saver shuts
off interior lamps after 45
minutes with ignition off
10
9
6