background image

BUILT-IN TALL-TUB DISHWASHER

1.  Minimum 32” drain loop, 1/2” inside diameter minimum. Floor drains require a siphon break.
2.  Connections preferably located toward left side of dishwasher. Care should be taken to route plumbing 
 

away from motor and blower (if equipped).

3.  Electrical and plumbing should meet all local and national codes.
4.  Electrical and water supplies should enter cabinet opening on the floor, or through the back or side walls, 
 

as shown in the shaded area of the drawing.

5.  When installing dishwasher in or near a corner, allow enough room for door to open without interfering 
 

with cabinet drawers or hardware.

Electrical requirements: 

Adequately wired individual 120V A/C, 60Hz approved electrical circuit. Use 

required fuse (15 amp) or comparable circuit breaker.

Important:

 Because of continuing product improvements, Maytag reserves the right to change specifications without notice. Dimensional specifications are provided for 

planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.

NOTES:

Style of product may vary from picture

Keep back

free of drain

inlet water and 

electrical.

Preferred

drain area

Preferred

drain area

A

D

C

B

PRODUCT DIMENSIONS

INCHES

CENTIMETERS

MODEL SKUs

A

B

C

D

23 7/8

60.6

19 1/2

49.5

23 7/8

60.6

33 1/2-35 1/4

85.1-89.5

MDB7751AWW

MDB7751AWB

MDB7751AWQ

MDB7751AWS

2005-05-06 at 09:39:29 CDT

Отзывы: