Installation and Operational Instructions for
ROBATIC
®
Type 500.20_.0 and Type 500.21_.0
Sizes 3 to 7
(B.5.3.EN)
25/09/2013 TK/RB/GF/SU
Chr. Mayr GmbH + Co.
KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Tel.: +49 8341 804-0, Fax: +49 8341 804-421
Page 1 of 10
Please read these Operational Instructions carefully and follow them accordingly!
Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts.
These Installation and Operational Instructions (I + O) are part of the clutch delivery.
Please keep them handy and near to the clutch at all times.
Contents:
Page 1:
- Contents
- Safety and Guideline Signs
- Guidelines on EU Directives
Page 2:
- Safety Regulations
Page 3:
- Safety Regulations
Page 4:
- Safety Regulations
Page 5:
- Clutch Illustrations
- Parts List
Page 6:
- Technical Data
- Scope of Delivery / State of Delivery
- Function
- Design
Page 7:
- Explanation of Terms
- Torque Characteristics
- Run-in Conditions
Page 8
- Installation Examples
- Boring the Rotor Hub
Page 9:
- Installation
- Rotor De-installation
- Electrical Connection
- Maintenance and Inspection
- Disposal
Page 10:
- Malfunctions / Breakdowns
Safety and Guideline Signs
DANGER
Immediate and impending danger, which can
lead to severe physical injuries or to death.
CAUTION
Danger of injury to personnel and
damage to machines.
Please Observe!
Guidelines on important points.
___________________________________________________
According to German notation, decimal points
in this document are represented with a
comma (e.g. 0,5 instead of 0.5).
Guidelines on the Declaration of Conformity
A conformity evaluation has been carried out for the product (electromagnetic ROBATIC
®
-clutches) in terms of the EC low
voltage directive 2006/95/EC. The Declaration of Conformity is laid out in writing in a separate document and can be
requested if required.
Guidelines on the EMC Directive (2004/108/EC)
The product cannot be operated independently according to the EMC directive.
Due to their passive state, clutches are also non-critical equipment according to the EMC.
Only after integration of the product into an overall system can this be evaluated in terms of the EMC.
For electronic equipment, the evaluation has been verified for the individual product in laboratory conditions, but not in the
overall system.
Guidelines on the Machinery Directive (2006/42/EC)
The product
is a component for installation into machines according to the Machinery Directive 2006/42/EC.
The ROBATIC
®
-clutches can fulfil the specifications for safety-related applications in coordination with other elements.
The type and scope of the required measures result from the machine risk analysis.
The ROBATIC
®
-clutch then becomes a machine component and the machine manufacturer assesses the conformity of
the safety device to the directive.
It is forbidden to start use of the product until you have ensured that the machine accords with the regulations stated in the
directive.
Guidelines on the ATEX Directive
Without a conformity evaluation, this product is not suitable for use in areas where there is a high danger of explosion.
For application of this product in areas where there is a high danger of explosion, it must be classified and marked
according to directive 94/9/EC.
