Mail Post Assembly lnstruction
1
s
General Information:
• Read instructions carefully before beginning assembly.
• Identify each component from material list.
• Do not use excessive force when assembling components.
• To clean this product, for best results use a soap solution and high-pressure water.
Newport Plus
Includes post
&
ann
Woodhaven Sign Post
Includes post
&
tx ann
Materials List:
(Westbrook model shown)
Decorative Post
Planter Arm
114in x 3in Galvanized lag bolt (1)
Steel washer (1)
#10 x 3in Steel screw (1)
Plastic snap cap (1)
Mailbox Support Arm
114in x 3in Galvanized lag bolt (2)
Steel washer (2)
#10 x 3in Steel screw (1)
Plastic snap cap (1)
4x4 wood post not included
4x4 actual dimensions are 3.5in x3.5in
72in length for mail post installations
77in length for the Woodhaven sign post
TOOLS REQUIRED
Shovel
Cordless Drill
Tape Measure
IMPORTANT NOTE
Newport Plus Double
Includes post
&
2x anns
7116"
Phillips Bit
Westbrook Plus
Includes post, ann
&
planter
ICI@I::I@D®IJI
Level
• 4x4 wood post, mailbox and mailbox mounting hardware NOT included with any Mayne mail posts
• Small mailbox recommended (up to Bibs), heavier mailboxes can be reinforced by securing 2
screws through the back of the mailbox directly into the post.
Charleston
Includes post
&
1 x arm
.,,,,,,,.,.
• USPS guidelines recommend that the bottom of the mailbox should be installed 41 in to 45in off the ground and
the front of the mailbox should be set back 6in to Bin from the curb. Please refer to your local postmaster for any
questions or concerns regarding the placement of your mail post.
