Read and understand this entire manual before installing and
using this product.
SAVE THIS MANUAL
Instruction Manual
Functions
1-1/4” Hitch Adapter
with 4-1/2” rise; 2” x 2”
Receiver for accesso-
res (bike rack or cargo
carrier). 6-1/2” distance
between pin holes.
Maximum Weight Rating
350 Lb. Tongue Weight*
Top Hitch Receiver
Not For Towing
Hitch Pins Required -
Steel with R-Shaped Safe-
ty Clip (not included)
1/2” Diameter for hitch
connection;
5/8”diameter for
accessory connection.
*Tongue Weight refers to a combination of the
amount of the trailer’s weight that presses down
on the trailer hitch, and the weight of the accesso-
ry and its load. Example: If a cargo carrier and it’s
load (total weight = 150 Lbs.) is to be connected to
the upper receiver, the maximum additional tongue
weight that can press down on the trailer hitch is
200 Lbs. The combination of these two tongue
weights should not exceed 350 Lbs.
1-1/4” to 2”
Hitch Adapter
with
4-1/2” Rise
Model 70355
Specifications
WARNING
Too much tongue weight can lower the tow vehicle in back, result-
ing in traction, steering and braking problems.
Too little tongue weight can reduce rear wheel traction, resulting
in instability, swaying or jackknifing.
For proper handling, tongue weight should be under 10% of the
Gross Trailer Weight (GTW).
Do not exceed the maximum weight ratings shown in the Specifi
-
cations table.
Do not exceed the rating of the lowest rated component in the
vehicle/trailer towing set-up.
Copyrightc 2013 by MAXXTOW. All rights reserved. No portion of this manual or any artwork contained herein may be repro-
duced in any shape or form without the express written consent of MAXXTOW. Due to continuing improvements, actual prod-
uct may differ slightly from the product described herein. Tools required for assembly and maintenance may not be included.
