9
ENGLISH
STEAM BRUSH MW-3708 BD
The unit is intended for ironing and cleaning various
types of fabrics.
DESCRIPTION
1.
Soleplate
2.
Unit body
3.
Removable water tank
4.
“MAX” water level mark
5.
Base
6.
Steam supply button
7.
Power cord protection
8.
Hanging loop
9.
Handle
10.
Indicator
11.
Water tank lock
12.
Temperature control
13.
Water inlet plug
14.
Brush-attachment
15.
Brush-attachment lock
16.
Beaker
SAFETY MEASURES
Before using the unit, read this instruction manual
carefully and keep it for future reference.
Use the unit for intended purposes only, as specified
in this manual. Mishandling the unit can lead to its
breakage and cause harm to the user or damage to
his/her property.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
•
The power cord is equipped with a “euro plug”;
plug it into the socket with a reliable grounding
contact.
•
To avoid fire, do not use adapters for plugging
the unit in.
•
To avoid mains overloading, never switch on
several electrical appliances with high power
consumption at a time.
•
Provide that during operation the power cord is
not on the ironing board and make sure that it
does not touch hot surfaces, sharp objects and
edges of furniture.
•
During breaks between operations, put the unit
on the foldable base.
•
Before plugging in/unplugging the unit, set the
temperature control to the minimal position.
•
Never leave the unit connected to the mains
unattended.
•
Always unplug the unit when you are not using
it.
•
To unplug the unit, always pull its plug, but not
the power cord.
•
To avoid the risk of electric shock, do not
immerse the unit, the power cord and the power
plug of the unit into water or other liquids.
•
Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemical agents etc.
•
Let the unit cool down completely and drain the
remaining water from it before taking the unit
away for storage.
•
Clean the unit regularly.
•
Do not touch the unit body and the power plug
with wet hands.
•
Do not allow children to touch the unit body and
the power cord during unit operation.
•
Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons, do not leave poly-
ethylene bags used as packaging unattended.
Attention! Do not allow children to play with polyethyl-
ene bags or packaging film. Danger of suffocation!
•
Do not disassemble the unit by yourself, if any
malfunction is detected or after it was dropped,
apply to the nearest authorized service center.
•
Transport the unit in the original package only.
•
Keep the unit out of reach of children and dis-
abled persons.
•
During unit operation do not touch the surface
marked with the
symbol. Danger of burns!
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE
ONLY
BEFORE THE FIRST USE
After unit transportation or storage under cold
(winter) conditions, it is necessary to keep it for
at least two hours at room temperature before
switching on.
–
Unpack the unit and remove any stickers that
can prevent unit operation.
–
Check the unit for damages; do not use it in
case of damages.
–
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
Note: When the unit is switched on for the first time,
the heating element burns, therefore occurrence of
foreign smell and a small amount of smoke is pos-
sible, it is normal.
WATER SELECTION
Use tap water to fill the tank. If tap water is hard, it is
recommended to mix it with distilled water in propor-
tion 1:1; if tap water is too hard, mix it with distilled
water in proportion 1:2 or use distilled water only.
MW-3708.indd 9
03.04.2014 11:30:43
