Maxtor 90500D4 Скачать руководство пользователя страница 1

DiamondMax

 Plus 2500

91000D8, 90910D8, 90875D7, 90840D7
90750D6, 90625D5 and 90500D4

All material contained herein Copyright © 1998 Maxtor Corporation.
DiamondMax™, DiamondMax™ 1280, DiamondMax™ 1750, Diamond-
Max™ 2160, DiamondMax™ 2880, DiamondMax™ Plus 2500 and Max-
Fax™ are trademarks of Maxtor Corporation. No Quibble

®

 Service is a

registered trademark of Maxtor Corporation. Other brands or products are
trademarks or registered trademarks of their respective holders. Contents
and specifications subject to change without notice. All rights reserved.
Printed in the U.S.A. 5/98

Corporate Headquarters

510 Cottonwood Drive
Milpitas, California 95035

Tel: 408-432-1700
Fax: 408-432-4510

Research and Development
Engineering Center

2190 Miller Drive
Longmont, Colorado 80501

Tel: 303-651-6000
Fax: 303-678-2165

Part #1402/A

This document is a condensed version of the full Product Reference Manual.

This version only includes the Maxtor Information about the Product.  Information
that can be found in the ANSI specification is not included in this document to
reduce its over all size.  Also eliminated are the Table of Contents and Glossary.

This condensed version is created to allow faster downloading from Maxtor's
Internet home page and MaxFax services.  

Содержание 90500D4



























Отзывы: