manualshive.com logo in svg

Maxtor 4W030H2, Руководство по эксплуатации продукта

Поделиться
Скачать
Maxtor 4W030H2 Скачать руководство пользователя страница 1

Maxtor 536DX Product Manual

Models: 4W100H6, 4W080H6, 4W060H4,
4W040H3 and 4W030H2

P/N:1544/A

This publication could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein – which will be incorporated
in revised editions of the publication. Maxtor may make changes or improvements
in the product(s) described in this publication at any time and without notice.

Copyright © 2001 Maxtor Corporation. All rights reserved. Maxtor

®

,

MaxFax

®

 and No Quibble Service

®

 are registered trademarks of Maxtor

Corporation. Other brands or products are trademarks or registered
trademarks of their respective holders.

Corporate Headquarters

510 Cottonwood Drive
Milpitas, California 95035
Tel: 408-432-1700
Fax: 408-432-4510

Research and Development Center

2190 Miller Drive
Longmont, Colorado 80501
Tel: 303-651-6000
Fax: 303-678-2165

Содержание 4W030H2


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды