11
compression
%C1 Enable MNP Class 5 data compression
only
&Q_
&Q0
Direct data link only (same as \N1)
&Q5
V.42 data link with fallback options
&Q6
Normal data link only (same as \N0)
\A_
\A0
64-character maximum MNP block size
\A1
128-character maximum MNP block
size
\A2
192-character maximum MNP block size
\A3
256-character maximum MNP block size
\Bn
Send a 1/10 second line break to the modem,
where n = 1 to 9. At normal connect, the default
is 3
\J_
\J0
DTE speed is independent of modem
connect speed
\J1
DTE speed matches the modem connect
speed
\Kn
Set break control, where n= 0 to 5. The effect of
this command depends on the modem’s
operating condition. Default is 5.
\N_
\N0
Normal data-link only
\N1
Direct data-link only
\N2
MNP data link only
\N3
V.42/MNP/Normal data link
\N4
V.42 data link only
\N5
V.42/MNP/Normal data link
\N7
V.42/MNP/Normal data link
\Q_
\Q0
Disable flow control
\Q1
XON\XOFF flow control
\Q3
RTS\CTS flow control
\T
n
Inactivity timer (n=0-255 minutes)
\V_
\V0
Disable error correction protocol result
code
\V1
Enable error correction protocol result
code
\V2
Enable error correction protocol result
code
\X_
\X0
If XON/XOFF flow control is enabled,
do not pass XON/XOFF to remote
modem or local DTE
\X1
If XON/XOFF flow control is enabled,
