10
DTR toggle
&D2
Modem hangs up, returns to the
Command Mode after DTR toggle
&D3
Resets modem after DTR toggle
&F_
&F
Recall factory default configuration
&G_
&G0
Guard tone disabled
&G1
550 Hz guard tone
&G2
1800 Hz guard tone
&K_
&K0
Disable flow control
&K3
Enable RTS/CTS hardware flow
control
&K4
Enable XON/XOFF software flow control
&L_
&L0
Modem is set up for dial-up operation
&M_
&M0
Asynchronous operation
&S_
&S0
Force DSR Signal High (ON)
&S1
DSR off in command mode, on in on-line
mode
&T_
&T0
Ends test in progress
&T1
Perform Local Analog Loopback Test
&T3
Perform Local Digital Loopback Test
&T6
Perform a Remote Digital Loopback Test
&V
&V0
Displays Active Profile
&W_
&W0
Stores the active profile as Profile 0
&W1
Stores the active profile as Profile 1
&Y_
&Y0
Configuration Profile 0 active upon
Power on or reset
&Z
n=x
n=0-3 Store phone number x into non-volatile
RAM
%E_
%E0
Disable auto-retrain
%E1
Enable auto-retrain
%X_
%X0
Disable re--dialing suppression
%X1
Enables re-dialing suppression
#CID=n n=0
Disable Caller ID
n=1
Enables Caller ID with formatting (date,
time, number, name)
n=2
Enables Caller ID without formatting
#CID?
Displays current Caller ID mode
#CID=?
Returns Caller ID capabilities of modem.
3.5 MNP/V.42/V.42bis Commands
%C_
%C0
Disable MNP Class 5 and V.42bis data
