background image

 

Safety 

 

2.7  Responsibilities of operating company and requirements for 

operator 

The operating company must comply with occupational safety regulations. The operating 

company is responsible for providing personal protective equipment such as protective 

footwear and protective clothing for operators and maintenance personnel. Valid accident 

prevention regulations, legal and operational guidelines, occupational safety regulations, 

and environmental regulations must be observed. 

The operating company is responsible for annual inspections and the technologically 

fault-free condition of the liftgate. An annual inspection must be carried out by qualified 

personnel and the results of this inspection must be entered in the inspection record 

book. 

Any defects must be corrected and missing parts replaced immediately. 

The operating company is responsible for the prompt repair of known defects. 

IMPORTANT

 

Additional regulations are printed in the inspection record book. The inspection record 

book is part of this user manual. 

IMPORTANT

 

The inspection report dealing with the static and dynamic inspection performed before 

commissioning the liftgate is kept in the inspection record book. 

 

The liftgate must be operated in accordance with the user manual. The liftgate may be 

operated, maintained, and serviced only by personnel who have received appropriate 

training and have been specifically instructed in the dangers associated with its 

operation. 

Only persons aged 18 years or older who have been instructed in the operation and 

maintenance of the liftgate and have proven their capability to the company are allowed 

to independently operate and maintain the liftgate. They must be expressly assigned to 

its operation and maintenance. The assignment for operating and maintaining the liftgate 

must be issued in writing. 

If more than one person is working on the liftgate, the operating company must appoint a 

supervisor. 

Liftgate maintenance may be performed by specially trained personnel only. 

 

WARNING 

 

Incorrect or improper use or handling of the liftgate or, for example, errors caused by its 

being operated by unqualified personnel can create risks for operators and bystanders 

that may result in serious or fatal injuries. 
The liftgate may be operated only by qualified personnel. 

 

Содержание GPC X1-LD



















































Отзывы:

Похожие инструкции для GPC X1-LD