Maxon EC frameless DT, Руководство по установке

Страница: 25 / 35

Maintenance
«EC frameless DT» Installation Manual
mmag | 2021-12 | rel10341
4-25
4 MAINTENANCE
4.1 Periodic Inspection
The «EC frameless DT» as a whole and its individual parts are maintenance-free.
Outer body, motor shaft, and bearings are customer-made parts. For their maintenance and repair consult
the relevant instructions. Thereby observe the following:
If you perform
maintenance on
outer body, motor
shaft, and bear-
ings:
• Before you start: Be aware of the necessary safety precautions (

page 5) and strictly follow the
general rules (  page 12).
• Verify the correct position of the motor before re-commissioning.
4.2 Storage
Observe all safety aspects (  “About the Safety Precautions” on page 5) and the stated environmental con-
ditions (

“Technical Data” on page 7).
Physically separate the storage location to prevent all persons who possibly may suffer impairment caused
by strong magnetic fields from approaching the device and force them to stay clear in a safe distance of at
least two (2) meters. Put up warning signs stating STRONG MAGNETIC FIELDS.
4.3 Decommissioning & Dismantling
Dismantling follows basically the Installation in reverse order (  chapter “3.2 Design Guidelines” on
page 14). Be aware of the necessary safety precautions (

page 5) and strictly follow the general rules
(  page 12).
4.4 Disposal
In no case dispose used components with normal domestic waste.
Dispose used components only via official collection sites or a certified recycling company. Draw to atten-
tion that the high magnetic forces produced by the device constitute an imminent hazard to persons wearing
a cardiac pacemaker or metal implants.