Maxon EC frameless DT, Руководство по установке

Страница: 20 / 35

Installation
Electrical Installation
«EC frameless DT» Installation Manual
3-20
mmag | 2021-12 | rel10341
3.4.1.2 TSX MAG Encoder (optional)
Figure 3-8 Encoder connector with radial cable outlet (723837)
Table 3-11 Pin assignment – Encoder connector with radial cable outlet
Table 3-12 Encoder connector with radial cable outlet
Pin Signal Description
1
Vcc Power supply voltage (+4.5…+5.5 VDC)
2
GND Ground
3
A\ Channel A complement
4
A Channel A
5
B\ Channel B complement
6
B Channel B
7
— do not connect
8
— do not connect
9
H1 Hall sensor 1
10
H2 Hall sensor 2
11
H3 Hall sensor 3
12
— do not connect
13
NTC+ Ther (

“Encoder: Thermistor (NTC)” on page 23)
14
NTC − Thermistor − (  “Encoder: Thermistor (NTC)” on page 23)
TSX MAG encoder connector with radial cable outlet
(723837)
Connector JST (SM14B-NSHSS-TB)
Suitable cable
TSX MAG to EPOS4 (708586), L=300 mm
TSX MAG to ESCON (708587), L=300 mm
Suitable plugs
Housing
Connector housing, 1.0 mm pitch 1.0 mm, 14-pole;
JST (NSHR-14V-S)
Contacts Crimp contact, 28-32 AWG; JST (SSHL-003T-P0.2)