Maxon BIKEDRIVE MX25, Руководство пользователя

Страница: 14 / 44

Maintenance
Care & Maintenance
14
maxon BIKE DRIVE | User Manual | rel8583
3) Check for damage: Check motor, battery, cables, and plug connectors
for external damage. Let your authorized BIKE DRIVE dealer replace
any damaged part immediately.
4) Check PowerGrip for ease of movement: It must automatically
bounce back when «Boost» is released. If this is not the case, you have
to dismount and let clean the PowerGrip (

page 22).
5) Charge battery: Choose a cool place to charge the battery. For infor-
mation on charging temperature and duration see

Table 6 on
page 38.
a) Connect battery charger with battery.
b) Connect battery charger to power outlet (100…240 VAC, 50…60 Hz)
and switch on.
c) Switch on battery. The charging process commences. Also observe
the following note «Remarks on the Charging Process».
d) Disconnect battery from battery charger.
e) Disconnect battery charger from power plug.
Remarks on the Charging Process
• The progress of the charging process is indicated by the battery LEDs. Thereby,
the currently level being charged flashes, the already charged levels light up
(

page 33).
• The battery may warm up during charging. If the specified charging temperature
range is exceeded, this is indicated by the battery charge indicator and charging
will be interrupted. After a cooling phase, charging will resume automatically. The
charging time can be prolonged.
• After reaching the full battery charge, the battery automatically shuts off. The
LEDs on the battery go out.
WARNING
Risk of injury
Improper charging of the battery can lead to serious injuries!
• Carry out charging only outdoors or in rooms equipped with fire detectors.
Use a fireproof pad and keep sufficient distance to flammable materials!
• Use only an original BIKE DRIVE battery charger!
• Protect the battery, battery charger, and plug connectors from contact with
humidity (water, dew, cleaning agents, etc.) and observe the permitted envi-
ronmental conditions!
• Do not carry out any manipulation, cleaning, or maintenance on the bike
while charging is ongoing!
• Oversee the charging process!
• In the event of fire:
• – Do not inhale combustion gases!
• – Call fire department!
• – Do not extinguish with water – use fire blanket!