LIFT CORPORATION
Sht. 14 of 56 DSG#
M-16-32
Rev.
C
Date: 08/13/19
9.
Unlatch and unfold platform. Refer to
operation manual if needed. Then, adjust
liftgate position so platform is level from
front to back.
10.
Securely tighten bolts fastening RH mount-
ing bracket to main frame bracket
(FIG.
14-1)
. Ensure the split lock washers are not
in the slotted holes on main frame bracket.
Repeat for LH mounting bracket.
8.
Use upper hole in the back of RH mounting
bracket as a template to drill hole through
inner side of corner post on pickup bed
(FIG. 14-1)
. Then, bolt RH mounting bracket
to corner post of pickup bed as shown in
FIG. 14-1
. Repeat for LH mounting bracket.
INSTALLING LIFTGATE - Continued
BOLTING RH MOUNTING BRACKET
TO PICKUP BED (LIFTGATE NOT SHOWN)
FIG. 14-1
11.
Reinstall taillights
(FIG. 14-1)
.
3/8”-16
HEX BOLT
ALUMINUM
SPACER
RH MOUNTING
BRACKET
DRILL HOLE,
3/8” DIA.
3/8”
HEX NUT
TAILLIGHT
3/8” LOCK
WASHER
3/8” FLAT
WASHER
CORNER
POST
