maxon motor
EPOS Positioning Controller
EPOS 24/5 Getting Started
9.
‘Startup Wizard’
Step 7 for EC motors: Position
Resolution
a)
Enter the resolution of the used encoder.
Figure 20: Startup wizard dialog for setting
EC motor encoder resolution
b)
Click the button ‘Weiter’ for the next step.
9. ‘Startup
Wizard’
Step 7 for DC motors: Summary
a)
A short summary of the most important
configuration values is displayed in this
window.
b)
If there are any mistakes in the
configuration, you can go back and modify
the values by clicking on the button
‘Zurück’.
c)
If you will not start the startup wizard at the
beginning of every EPOS user interface
session, you have to deselect the option
‘Always start this wizard after program
start’.
Figure 21: Startup wizard configuration
summary
d)
If all settings are correct, click the button
‘Fertig stellen’ to close the startup wizard.
18
maxon motor control
December 2008 Edition / document number 573050-07 / subject to change
