maxon motor
EPOS Positioning Controller
EPOS 24/5 Getting Started
6.
‘Startup Wizard’
Step 4 for EC motors: Motor Pole Pair
a)
Select the correct number of pole pairs.
Figure 13: Startup wizard dialog for choosing
EC motor pole pairs
b)
Click on the button ‘Weiter’ for the next
step.
6.
‘Startup Wizard’
Step 4 for DC motors: Motor Data
a)
Select the maximum permissible speed.
b)
Select the nominal current (maximum
continuous current).
c)
Select the thermal time constant of the
winding.
Figure 14: Startup wizard dialog for setting
DC motor data
d)
Click the button ‘Weiter’ for the next step.
7.
‘Startup Wizard’
Step 5 for EC motors: Motor Data
a)
Select the maximum permissible speed.
b)
Select the nominal current (maximum
continuous current).
c)
Select the thermal time constant of the
winding.
Figure 15: Startup wizard dialog for setting
EC motor data
d)
Click the button ‘Weiter’ for the next step.
7. ‘Startup
Wizard’
Step 5 for DC motors: Position Sensor
Type
a)
Select the used position sensor type
Figure 16: Startup wizard dialog for choosing
DC motor position senso type
r
b)
Click the button ‘Weiter’ for the next step.
16
maxon motor control
December 2008 Edition / document number 573050-07 / subject to change
