22
Maxim Integrated
Evaluates: DS34S132
DS34S132 Evaluation Kit
Figure 2-7. REF CLK Connector
Figure 2-8. CONSOLE Connector
2.5.3 Connecting to the Reference Clock Source
The EV kit is connected to a reference clock source
through an unbalanced BNC connector designated
REF CLK
. Connect the EV kit to the reference clock
source using a using a 50
I
coaxial cable. The input
signal must be LVTTL (square wave with 0V/3.3V levels).
See
Figure 2-7
.
2.5.4 Connecting to an ASCII Terminal
The EV kit is connected to an ASCII terminal through a
9-pin, D-type, female connector designated
CONSOLE
.
See
for the connector pin
arrangement. See
Figure 2-8
.
To connect to an ASCII terminal:
1) Connect a serial cable with a male 9-pin, D-type con-
nector to the
CONSOLE
connector.
2) Connect the other end of the serial cable to an ASCII
terminal.
3. Operation
This section provides a detailed description of the
front panel indicators and their functions, and explains
the EV kit configuration using an ASCII terminal. See
for detailed explanations of param-
eters on the menus.
