manualshive.com logo in svg

Maxim Integrated DS34S132, Руководство пользователя

Поделиться
Скачать
Maxim Integrated DS34S132 Скачать руководство пользователя страница 1

   

Evaluates:  DS34S132

DS34S132 Evaluation Kit

                      General Description

The DS34S132 evaluation kit (EV kit) is an easy-to-use 
EV kit for evaluating the DS34S132 32-port TDM-over-
packet (TDMoP) IC. The EV kit is a stand-alone system 
with a TDMoP chip, local oscillator, local control proces-
sor, memory, external E1/T1 LIUs and framers, power 
supply, and user interface software included in a 2.5 
RU enclosure. The EV kit is controlled over an RS-232 
serial link from an external ASCII terminal (typically using 
terminal emulation software running on a PC) or through 
a telnet session. The ASCII user interface is menu driven 
and hierarchical for easy use. The behavior and perfor-
mance of the TDMoP IC can be evaluated with a single 
EV kit where the Ethernet signal is looped back to the kit, 
or with two EV kits configured as separate end points.

                            EV Kit Contents

DS34S132 EV Kit System 
 

TDMoP IC Daughter Card (Factory Installed) 

 

MPC8313 CPU Daughter Card (Factory Installed) 

 

User Interface Software (Factory Installed)

                     Ordering Information

                                       Features

S 

Complete System: Motherboard and Daughter 
Cards in a Convenient 2.5 RU Enclosure

S 

Menu-Driven ASCII Text User Interface Software

S 

System Processor on a Separate Daughter Card

S 

Ethernet PHYs, I/O Jacks, E1/T1 Transceivers, and 
Clock Sources on Motherboard

S 

Built-In AC Power-Supply Module

S 

Several Popular TCXO and OCXO Oscillators from 
Which to Select and BNC Connectors for Lab 
References

S 

9-Pin Serial Jack to Connect an ASCII Terminal 
for Configuration and Status

S 

System TCP/IP Stack for Configuration and Status 
Over IP/Ethernet

S 

One RJ45 Ethernet Jack for Connection to the 
Ethernet Network

S 

One RJ45 Jack for Each E1/T1 Port

S 

RJ45 External Clock Input Jack

S 

BNC Common Clock Input Jack

S 

BNC Reference Clock Input Jack

S 

16-Bit CPU Interface to TDMoP IC

                                                TDMoIP

®

 Evaluation System with No Lid

19-5865; Rev 0; 5/11

TDMoIP is a registered trademark of RAD Data Communications, Ltd.

PART

TYPE

DS34S132DK

EV Kit

For pricing, delivery, and ordering information, please contact Maxim Direct 
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.

Содержание DS34S132

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды