1
Tel-Time Talking Analog Watch
(Item #702430 & 702435)
The Tel-Time Talking Analog Watch allows you to hear the time at the press of a button,
or see it displayed on its analog face. The watch hands automatically synchronize with
the digital time you set for the talking function. A single battery and a quartz crystal
ensure that both the voice and the watch hands keep accurate time.
S3
Button Functions:
S1 - “Two O’clock Button”: Press for Time Announcement
S2 - “Four O’clock Button”: Minute Set
S3 - “Eight O’clock Button”: Hour Set
Note: Use a pen or other pointed tool to press the
S2
and
S3
buttons.
Set the Time
The following procedure guides you in setting the time announcement. After this time is
set, the analog hands will automatically run to match the time you set.
1.
Press S3
(8 o’clock button) while the watch is in the Time Keeping mode to set Hour.
Every press of the button advances the hour by one. Listen carefully to the watch to
make sure the right AM or PM time has been set.
2.
Press S2
(4 o’clock button) to set Minute. Every press of the button advances the
minute by one.
3.
Press S1
once to confirm the time set (or the watch will confirm by itself after 30
seconds).
4.
Once you confirm the time set, the watch will begin to run fast and automatically
synchronize itself with the time you set in steps 1-3.
5.
When the watch resumes normal running, the analog time should match the spoken
time. If they don’t match, go to “Synchronize Hands to Match Time Announcement”.
