Maxell MA-XL1, Руководство пользователя

Страница: 9 / 126

9
Product connection
Before connecting the product to a device, consult the manual of the device to confirm that the device
is suitable for connecting with this product and prepare the required accessories, such as a cable in
accord with the signal of the device.
Consult your dealer when the required accessory did not come with this product or the accessory is
damaged.
After making sure that this product and the devices are turned off, perform the connection, according to
the following instructions.
WARNING
• Use only the appropriate accessories. Otherwise it could cause a fire or damage the product and
devices.
- Use only the accessories specified or recommended by this product’s manufacturer. It may be
regulated under some standards.
- Neither disassemble nor modify this product and the accessories.
- Do not use the damaged accessory. Be careful not to damage the accessories. Route a cable so
that it is neither stepped on nor pinched.
• Be careful to the volume When using headphone or earphone. If you continue to use it for a long time
at a loud volume that stimulates your ears, your auditory capacity may be greatly impaired.
CAUTION
• Do not turn on or off the product while connected to a device in operation, unless that is directed in
the manual of the device. Otherwise it may cause malfunction in the device or product.
• Be careful not to mistakenly connect a connector to a wrong port. Otherwise it may cause
malfunction in the device or product.
- When connecting a connector to a port, make sure that the shape of the connector fits the port.
- Tighten the screws to connect a connector equipped with screws to a port.
- Use the cables with straight plugs, not L-shaped ones.
• Before connecting this product to a network system, be sure to obtain the consent of the
administrator of the network.
• Do not connect the WAN/LAN port to any network that might have the excessive voltage.
• Be sure to confirm that the product has been installed and connected safely even if it is turned on
automatically.
• If you connect the product to an existing network, consult a network administrator before setting
server addresses.
• You should be aware of the following:
DO NOT USE NEAR THE FOLLOWING!
- Microwave ovens
- Industrial, scientific or medical devices
- Designated low power radio stations
- Premises radio stations
- Wireless LAN router
- Using this product near the above may cause radio interference, which would result in a decrease in
transmission speed or interruption, and even lead to malfunctioning of devices such as pacemakers.
• Depending on the location where this product is used, radio wave interference may occur, which
may result in a decrease in transmission speed or interruption in communication.
• Bringing this product out of the country or region you reside in and using it there could lead to a
violation of the radio laws of that country or region.
• The product is for indoor use only. Outdoor use is prohibited.
• Be careful to the volume When using headphone or earphone. If you raise the volume too much from
the beginning, you may suddenly get loud noise and damage your ears. Please increase the volume
little by little.
(continued on next page)