Maxcom MM901, Руководство пользователя

Страница: 14 / 48

14
to malfunction.
5.5 Charge the Battery
1. Plug the charger into a power outlet.
2. Open the cover flap on the micro-USB socket that is
located at the top of the phone.
3. Plug the charger into a socket of the phone. A battery
icon will start blinking after the charger is properly
connected.
After the battery is fully charged and the battery icon stops
blinking, unplug the charger.
If the battery is about to get discharged, the phone will emit a
warning beep (if the warning beeps are enabled on the phone)
a
nd the message “Battery discharged” will appear; when the
battery get discharged, the phone will automatically switch off. Do
not leave the battery discharged for a long time as it might
negatively affect the battery quality and the battery life. To ensure
your phone works properly, use only the charger recommended by
the Manufacturer. While charging, keep the back cover in place.
While charging, place your phone in a well ventilated place with air
temperature between 0°C ~ 45°C. If the battery gets totally
discharged, it might take several minutes for a battery icon to
appear and before the phone is ready to be used again.